XQ7Z100-2RF900I

Features

• Full-range extended temperature testing
• Mask set control
• Fully leaded (Pb) content
• Ruggedized packaging (RB, RF)
• Long-term availability
• Anti-counterfeiting features
• Fourth-generation information assurance and anti-tamper support
Dual-core ARM Cortex-A9 Based Application
Processor Unit (APU)
• 2.5 DMIPS/MHz per CPU
• CPU frequency: Up to 800 MHz
• Coherent multiprocessor support
• ARMv7-A architecture
• TrustZone security
• Thumb-2 instruction set
• Jazelle RCT execution Environment Architecture
• NEON media-processing engine
• Single and double precision Vector Floating Point Unit (VFPU)
• CoreSight and Program Trace Macrocell (PTM)
• Timer and Interrupts
• Three watchdog timers
• One global timer
• Two triple-timer counters Caches
• 32 KB Level 1 4-way set-associative instruction and data caches (independent for each CPU)
• 512 KB 8-way set-associative Level 2 cache (shared between the CPUs)
• Byte-parity support
On-Chip Memory
• On-chip boot ROM
• 256 KB on-chip RAM (OCM)
• Byte-parity support
External Memory Interfaces
• Multiprotocol dynamic memory controller
• 16-bit or 32-bit interfaces to DDR3, DDR3L, DDR2, or LPDDR2 memories
• ECC support in 16-bit mode
• 1GB of address space using single rank of 8-, 16-, or 32-bit-wide
memories
• Static memory interfaces
• 8-bit SRAM data bus with up to 64 MB support
• Parallel NOR flash support
• ONFI1.0 NAND flash support (1-bit ECC)
• 1-bit SPI, 2-bit SPI, 4-bit SPI (quad-SPI), or two quad-SPI (8-bit)
serial NOR flash
8-Channel DMA Controller
• Memory-to-memory, memory-to-peripheral, peripheral-to-memory,
and scatter-gather transaction support
I/O Peripherals and Interfaces
• Two 10/100/1000 tri-speed Ethernet MAC peripherals with
IEEE Std 802.3 and IEEE Std 1588 revision 2.0 support
• Scatter-gather DMA capability
• Recognition of 1588 rev. 2 PTP frames
• GMII, RGMII, and SGMII interfaces
• Two USB 2.0 OTG peripherals, each supporting up to 12 Endpoints
• USB 2.0 compliant device IP core
• Supports on-the-go, high-speed, full-speed, and low-speed
modes
• Intel EHCI compliant USB host
• 8-bit ULPI external PHY interface
• Two full CAN 2.0B compliant CAN bus interfaces
• CAN 2.0-A and CAN 2.0-B and ISO 118981-1 standard
compliant
• External PHY interface
• Two SD/SDIO 2.0/MMC3.31 compliant controllers
• Two full-duplex SPI ports with three peripheral chip selects
• Two high-speed UARTs (up to 1 Mb/s)
• Two master and slave I2C interfaces
• GPIO with four 32-bit banks, of which 54 bits can be used with the PS
I/O (one bank of 32b and one bank of 22b) and up to 64 bits (up to
two banks of 32b) connected to the Programmable Logic
• 54 flexible multiplexed I/O (MIO) for peripheral pin assignments
Interconnect
• High-bandwidth connectivity within PS and between PS and PL
• ARM AMBA AXI based
• QoS support on critical masters for latency and bandwidth control
Programmable Logic (PL)
Configurable Logic Blocks (CLB)
• Look-up tables (LUT)
• Flip-flops
• Cascadable adders
36 Kb Block RAM
• True Dual-Port
• Up to 72 bits wide
• Configurable as dual 18 Kb
DSP Blocks
• 18 x 25 signed multiply
• 48-bit adder/accumulator
• 25-bit pre-adder
Programmable I/O Blocks
• Supports LVCMOS, LVDS, and SSTL
• 1.2V to 3.3V I/O
• Programmable I/O delay and SerDes
JTAG Boundary-Scan
• IEEE Std 1149.1 Compatible Test Interface
PCI Express Block
• Supports Root Complex and End Point configurations
• Supports up to Gen2 speeds
• Supports up to 8 lanes
Serial Transceivers
• Up to 16 receivers and transmitters
• Supports up to 10.3125 Gb/s data rates
Two 12-Bit Analog-to-Digital Converters
• On-chip voltage and temperature sensing
• Up to 17 external differential input channels
• One million samples per second maximum conversion rate

FAQ

• Q: Does the price of XQ7Z100-2RF900I devices fluctuate frequently?
• The FPGAkey search engine monitors the XQ7Z100-2RF900I inventory quantity and price of global electronic component suppliers in real time, and regularly records historical price data. You can view the historical price trends of electronic components to provide a basis for your purchasing decisions.
• Q: Do I have to sign up on the website to make an inquiry for XQ7Z100-2RF900I?
• No, only submit the quantity, email address and other contact information required for the inquiry of XQ7Z100-2RF900I, but you need to sign up for the post comments and resource downloads.
  
• Q: How can I obtain software development tools related to the Xilinx FPGA platform?
• In FPGA/CPLD design tools, Xilinx's Vivado Design Suite is easy to use, it is very user-friendly in synthesis and implementation, and it is easier to use than ISE design tools; The specific choice depends on personal habits and functional requirements to specifically select a more suitable match. You can search and download through the FPGA resource channel.
• Q: Where can I purchase Xilinx XQ7Z100 Development Boards, Evaluation Boards, or Defense-grade Zynq-7000Q SoC Starter Kit? also provide technical information?
• FPGAkey does not provide development board purchase services for the time being, but customers often consult about ZedBoard, Basys 3 board, TinyFPGA BX, Nexys4-DDR, Terasic DE10-Nano, Digilent Arty S7, etc. If you need relevant technical information, you can submit feedback information, our technicians will contact you soon.
• Q: How to obtain XQ7Z100-2RF900I technical support documents?
• Enter the "XQ7Z100-2RF900I" keyword in the search box of the website, or find these through the Download Channel or FPGA Forum .
  
• Q: What should I do if I did not receive the technical support for XQ7Z1002RF900I in time?
• Depending on the time difference between your location and our location, it may take several hours for us to reply, please be patient, our FPGA technical engineer will help you with the XQ7Z100-2RF900I pinout information, replacement, datasheet in pdf, programming tools, starter kit, etc.