XC2C32A-6VQG44 of Xilinx CoolRunner-II CPLD

XC2C32A-6VQG44 FPGAs Overview

This XC2C32A-6VQG44 device consists of eight Function Blocks inter-connected by a low power Advanced Interconnect Matrix (AIM). The AIM feeds 40 true and complement inputs to each Function Block. The Function Blocks consist of a 40 by 56 P-term PLA and 16 macrocells which contain numerous configuration bits that allow for combinational or registered modes of operation.

Additionally, these registers can be globally reset or preset and configured as a D or T flip-flop or as a D latch. There are also multiple clock signals, both global and local product term types, configured on a per macrocell basis. Output pin configurations include slew rate limit, bus hold, pull-up, open drain and programmable grounds. A Schmitt-trigger input is available on a per input pin basis. In addition to storing macrocell output states, the macrocell registers may be configured as direct input registers to store signals directly from input pins.

Clocking is available on a global or Function Block basis. Three global clocks are available for all Function Blocks as a synchronous clock source. Macrocell registers can be individually configured to power up to the zero or one state. A global set/reset control line is also available to asynchronously set or reset selected registers during operation. Additional local clock, synchronous clock-enable, asynchronous set/reset and output enable signals can be formed using product terms on a per-macrocell or per-Function Block basis.

A DualEDGE flip-flop feature is also available on a per macrocell basis. This feature allows high performance synchronous operation based on lower frequency clocking to help reduce the total power consumption of the device.

Circuitry has also been included to divide one externally supplied global clock (GCK2) by eight different selections. This yields divide by even and odd clock frequencies.

The XC2C32A-6VQG44 CPLD is I/O compatible with various JEDEC I/O standards (see Table 1). This XC2C32A-6VQG44 device is also 1.5V I/O compatible with the use of Schmitt-trigger inputs.

By mapping a signal to the DataGATE function, lower power can be achieved due to reduction in signal switching.

Another feature that eases voltage translation is I/O banking. Two I/O banks are available on the CoolRunner-II 128 macrocell XC2C32A-6VQG44 device that permit easy interfacing to 3.3V, 2.5V, 1.8V, and 1.5V devices.

Features

• In-System Programmable PROMs for Configuration of Xilinx FPGAs

• Low-Power Advanced CMOS NOR Flash Process

• Endurance of 20,000 Program/Erase Cycles

• Operation over Full Industrial Temperature Range (–40°C to +85°C)

• IEEE Standard 1149.1/1532 Boundary-Scan (JTAG) Support for Programming, Prototyping, and Testing

• JTAG Command Initiation of Standard FPGA Configuration

FAQ

Q: Does the price of XC2C32A-6VQG44 devices fluctuate frequently?
The FPGAkey search engine monitors the XC2C32A-6VQG44 inventory quantity and price of global electronic component suppliers in real time, and regularly records historical price data. You can view the historical price trends of electronic components to provide a basis for your purchasing decisions.
Q: Do I have to sign up on the website to make an inquiry for XC2C32A-6VQG44?
No, only submit the quantity, email address and other contact information required for the inquiry of XC2C32A-6VQG44, but you need to sign up for the post comments and resource downloads.
Q: How can I obtain software development tools related to the Xilinx FPGA platform?
In FPGA/CPLD design tools, Xilinx's Vivado Design Suite is easy to use, it is very user-friendly in synthesis and implementation, and it is easier to use than ISE design tools; The specific choice depends on personal habits and functional requirements to specifically select a more suitable match. You can search and download through the FPGA resource channel.
Q: Where can I purchase Xilinx XC2C32A Development Boards, Evaluation Boards, or CoolRunner-II CPLD Starter Kit? also provide technical information?
FPGAkey does not provide development board purchase services for the time being, but customers often consult about ZedBoard, Basys 3 board, TinyFPGA BX, Nexys4-DDR, Terasic DE10-Nano, Digilent Arty S7, etc. If you need relevant technical information, you can submit feedback information, our technicians will contact you soon.
Q: How to obtain XC2C32A-6VQG44 technical support documents?
Enter the "XC2C32A-6VQG44" keyword in the search box of the website, or find these through the Download Channel or FPGA Forum .
Q: What should I do if I did not receive the technical support for XC2C32A6VQG44 in time?
Depending on the time difference between your location and our location, it may take several hours for us to reply, please be patient, our FPGA technical engineer will help you with the XC2C32A-6VQG44 pinout information, replacement, datasheet in pdf, programming tools, starter kit, etc.