$22.880 - $29.450 | 1 Pieces(Min. Order)
For product pricing customization or other inquiries
FPGAKey Technical Documents
Download DatasheetThe Xilinx Automotive (XA) Spartan-6 family of XA6SLX4-3CSG225Q FPGAs provides leading system integration capabilities with the lowest total cost for highvolume automotive applications. The ten-member family delivers expanded densities ranging from 3,840 to 101,261 logic cells and faster, more comprehensive connectivity. Built on a mature 45 nm low-power copper process technology that delivers the optimal balance of cost, power, and performance, the XA6SLX4-3CSG225Q offers a new, more efficient, dual-register 6-input look-up table (LUT) logic and a rich selection of built-in system-level blocks. These include 18 Kb (2 x 9 Kb) block RAMs, second generation DSP48A1 slices, SDRAM memory controllers, enhanced mixed-mode clock management blocks, SelectIO technology, power-optimized high-speed serial transceiver blocks, PCI Express compatible Endpoint blocks, advanced system-level power management modes, auto-detect configuration options, and enhanced IP security with AES and Device DNA protection. These features provide a low-cost programmable alternative to custom ASIC products with unprecedented ease of use.
XA6SLX4-3CSG225Q FPGAs offer the best solution for flexible and scalable high-volume logic designs, high-bandwidth parallel DSP processing designs, and cost-sensitive applications where multiple interfacing standards are required. XA SpartanXA6SLX4-3CSG225Q are the programmable silicon foundation for Targeted Design Platforms that deliver integrated software and hardware components that enable designers to focus on innovation as soon as their development cycle begins
The Xilinx Embedded - FPGAs (Field Programmable Gate Array) series XA6SLX4-3CSG225Q is FPGA XA Spartan-6 Family 3840 Cells 45nm (CMOS) Technology 1.2V 225Pin CSBGA, View Substitutes & Alternatives along with datasheets, stock, pricing from Authorized Distributors at FPGAkey.com, and you can also search for other FPGAs products.• 45 nm process optimized for cost and low power
• Hibernate power-down mode for zero power
• Suspend mode maintains state and configuration with multipin wake-up, control enhancement
• High performance 1.2V core voltage (LX and LXT FPGAs, -2 and -3 speed grades)
• Multi-voltage, multi-standard SelectIO interface banks
• Up to 1,080 Mb/s data transfer rate per differential I/O
• Selectable output drive, up to 24 mA per pin
• 3.3V to 1.2V I/O standards and protocols
• Low-cost HSTL and SSTL memory interfaces
• Hot swap compliance
• Adjustable I/O slew rates to improve signal integrity
• High-speed GTP serial transceivers in the LXT FPGAs
• Up to 3.2 Gb/s
• High-speed interfaces including: Serial ATA and PCI Express
• Efficient DSP48A1 slices
• High-performance arithmetic and signal processing
• Fast 18 x 18 multiplier and 48-bit accumulator
• Pipelining and cascading capability
• Pre-adder to assist filter applications
• Integrated Memory Controller blocks
• DDR, DDR2, DDR3, and LPDDR support
• Data rates up to 800 Mb/s
• Multi-port bus structure with independent FIFO to reduce design timing issues
• Abundant logic resources with increased logic capacity
• Optional shift register or distributed RAM support
• Efficient 6-input LUTs improve performance and minimize power
• LUT with dual flip-flops for pipeline centric applications
• Block RAM with a wide range of granularity
• Fast block RAM with byte write enable
• 18 Kb blocks that can be optionally programmed as two independent 9 Kb block RAMs
• Clock Management Tile (CMT) for enhanced performance
• Low noise, flexible clocking
• Digital Clock Managers (DCMs) eliminate clock skew and duty cycle distortion
• Phase-Locked Loops (PLLs) for low-jitter clocking
• Frequency synthesis with simultaneous multiplication, division, and phase shifting
• Sixteen low-skew global clock networks
• Simplified configuration, supports low-cost standards
• 2-pin auto-detect configuration
• Broad third-party SPI (up to x4) and NOR flash support
• MultiBoot support for remote upgrade with multiple
bitstreams, using watchdog protection
• Enhanced security for design protection
• Unique Device DNA identifier for design authentication
• AES bitstream encryption in the XA6SLX75, XA6SLX75T, and XA6SLX100 devices
• Integrated Endpoint block for PCI Express designs (LXT)
• Low-cost PCI technology support compatible with the 33 MHz, 32- and 64-bit specification.
• Faster embedded processing with enhanced, low cost, MicroBlaze 32-bit soft processor
• Industry-leading IP and reference designs
Artificial Intelligence
5G Technology
Cloud Computing
Consumer Electronics
Wireless Technology
Industrial Control
Internet of Things
Medical Equipment
Specification | Value |
---|---|
Number of LABs/CLBs | 300 |
Number of Logic Elements/Cells | 3840 |
Total RAM Bits | 221184 |
Number of I/O | 132 |
Voltage - Supply | 1.14V ~ 1.26V |
Mounting Type | Surface Mount |
Operating Temperature | -40℃ ~ 125℃ (TJ) |
Package / Case | 225-LFBGA, CSPBGA |
Supplier Device Package | 225-CSPBGA (13x13) |
1+ $29.9059
10+ $29.0051
30+ $27.5639
50+ $26.8432
100+ $25.5821
250+ $23.9608
500+ $22.8798
160+ $29.4498
Support