This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.
Home > FPGA Technical Tutorials > The Zynq Book > Designing with Zynq (“How do I work with it?”) > Getting Started

TABLE OF CONTENTS

Xilinx FPGA FPGA Forum

Getting Started

FONT SIZE : AAA

Getting Started 

If you are new to Zynq, then you may be wondering what is required in order to get  started with your first design, and where to look for support. This section provides a brief  summary. More detail on each aspect will be provided during the remainder of the chapter.

Obtaining Design Tools 

To start designing for Zynq, you will need to obtain the appropriate design tools from  Xilinx. These can be ordered on DVD, or downloaded from the Xilinx website at the URL:To start designing for Zynq, you will need to obtain the appropriate design tools from  Xilinx. These can be ordered on DVD, or downloaded from the Xilinx website at the URL: http:/www.xilinx.com/support/download/index.htm 

(Alternatively, the download page can be accessed by following the Downloads link from  the Xilinx home page).  

There are a number of design tools available, but you will need only the following: 

• Vivado Design Suite (version 2014.1 or later) 

Note that Vivado can be downloaded as a full version, or with customs selections of tools  and target boards, based on user preferences. You may also note the presence of the ISE  Design Suite in the list of available downloads, but this is not required (Vivado replaces ISE  for newer devices like the Zynq). Further explanation is provided in Section 3.5, which  compares elements of the Vivado and ISE Design Suites for readers who may be experienced with the older tool flow. However, please note that the ISE Design Suite is not recommended for new designs, and instead Vivado should be adopted.  

Aside from the tools themselves, it is worth highlighting the Documentation Navigator utility, which is a very useful option. This provides an easy way to access all of the relevant  user guides and other support documents: 

Finally, if used in a network license configuration, then the following separate download  will be required for installation on the license server machine: 

• License Management Tools (2014.1 Utilities or later) 

This download is not needed for standalone licensing methods. 

Further guidance about downloading and installing design tools can be found in [27] (or  check for the version of this document corresponding to your desired version of Vivado  Design Suite).

Design Tool Editions and Licensing 

The Vivado design tools are available in different editions, all of which may be installed  from the same set of downloaded files (as outlined in Section 3.1.1), but which are differen tiated by licence type. Licensing is administered online via a Xilinx user account. 

There are three licence options for Vivado: WebPACK, Design Edition, and System  Edition, the primary features of which are summarised in Table 3.1. The WebPACK edition  is a free version, including all of the core software for creating first designs with Zynq:  Vivado Integrated Development Environment (IDE) for hardware design, SDK and GNU  Compiler Connection (GCC) compiler for software development, and Vivado Simulator  for verification. A time-limited evaluation version of the System Edition can also be  obtained.

Versions of the Vivado Design Suite [23].png

a. The WebPACK edition is free, with features as listed in the table, and is device limited: it  supports Zynq devices, and a subset of Artix and Kintex FPGAs. Refer to [27] for device  limitation details.

Licenses can be configured either as server / floating licenses (i.e. a bank of licenses  hosted on a network license server), or as individual licenses fixed to specific computers 

CHAPTER 3: Designing with Zynq (“How do I work with it?”) (‘node-locked’). 

The WebPACK edition is free to obtain, and available as a node-locked  license only.

Design Tool Functionality 

The functionality of the various tools listed in Table 3.1 will be explained as required  throughout the rest of the book, starting in Section 3.2 of this chapter when the design flow  is discussed in detail. As the discussion will illustrate, Vivado IDE and SDK provide the  bases for hardware and software system design, respectively, and therefore might be  considered the two most important tools in the suite [4].  

Vivado IDE is an integrated development environment for creating the hardware system  part of the SoC design, i.e. the processor, memories, peripherals, external interfaces and  bus connections. Vivado IDE interacts with other tools in the Vivado Design Suite, and also  includes facilities for integrating and packaging IP, which enhances possibilities for design  reuse.

SDK is a software design suite based on the popular Eclipse platform, which includes  driver support for all Xilinx IPs, GCC library support for ARM and NEON extensions  using the C and C++ languages, and tools for debugging and profiling [2], [29].

Of the verification and debugging tools, Vivado Simulator represents a Hardware  Description Language (HDL) simulator environment for testing the hardware components  within the system. The Vivado Logic Analyser provides facilities for ‘in-system’ verification  of the design: specific additional cores are included in the hardware design and implemented on the Zynq device to enable probing of on-chip behaviour during run-time; the  captured data is then transmitted back to the host PC where it may be viewed in a logic  analyser [26]. Vivado Serial I/O Analyser is, as its name suggests, a similar tool catering  specifically for the high speed communications interfaces.

The Vivado High-Level Synthesis (Vivado HLS) and System Generator for DSP tools  are specifically used for creating, testing and managing IP for inclusion in the hardware  system. System Generator is a block-based tool which is used for creating and simulating  DSP designs, and it will be featured in Chapter 13 along with other methods of IP creation.  Vivado HLS is a design tool for hardware synthesis from C-level descriptions, and is the  subject of a special focus chapter later in the book (Chapter 15). This method of design  creation is potentially a rapid one, allowing subsystems to be described at a high level of  abstraction, and it is particularly relevant in today’s electronics industry where time-tomarket is an increasingly important factor.

Third Party Tools

The Vivado design suite supports certain third party tools, details of which may be  found in [27] (or check the Xilinx website for the most recent version).  

Of these, the majority are swappable replacements for certain tools within the Vivado  design suite; for example, a particular HDL simulator (such as Aldec® Active HDL® or  Mentor Graphics® ModelSim® or Questa®) may be preferred in place of the Vivado  Simulator. Likewise there is potential to utilise a third party synthesis tool like Synopsys® Synplify® or Synplify Pro®.  

A notable exception to the above relates to the System Generator tool. This is hosted in  the MathWorks® MATLAB® / Simulink® environment, and therefore relies on the MATLAB  and Simulink third party software products in order to function [6]. Two associated  MathWorks components, the Signal Processing Toolbox and DSP System Toolbox, are  additionally needed to support most DSP designs. One of the particular advantages of  System Generator as a development environment is that the developer can exploit all of the  capabilities of MATLAB and Simulink for scripting, simulation, visualisation, and file I/O,  together with the specific facilities of any additional toolboxes that may be available (e.g.  image processing, communications, etc.).  

As a general point, it is important to note that particular versions of third party software  may be required for compatibility with the installed version of the Vivado suite, as detailed  in [27], hence it is recommended that these details are checked prior to installation.

System Setup and Requirements

The reader is again referred to [27], or the version of that user guide corresponding to their installation, for detailed information regarding supported operating systems, as this may change over time. As a general statement, recent versions of Windows and selected versions of Linux are supported. When using Vivado, it is important that the OS grants the user write permissions for all directories containing design files.  

Naturally the hardware specification of the development computer is significant, as this influences execution times when running the design tools. Xilinx does not publish system recommendations, but does provide an indication of memory requirements by target device [21]. It is particularly notable that 32-bit operating systems are not suitable for   the two largest Zynq devices. At least 4GB of RAM is recommended for the three  smaller devices, while the largest may require up to 12GB of RAM. Generally speaking, at  least a dual-core processor is recommended, and some of the design tools have multi-core processing support, i.e. they can exploit processors with multiple cores.

The computer hardware configuration also requires a USB port for programming the  Zynq over JTAG, and ideally another for PC-Zynq communication via the UART and  Terminal application (this is a common and useful method for debugging designs). 

Finally, as implied above, the user should have a Zynq development board on which to prototype and test their designs. A development board hosts a Zynq device, together with various other resources such as power circuitry, external memory, interfaces for  programming and communication, simple user I/O such as buttons, LEDs, switches, and  usually a number of other peripheral interfaces and connectors. During the debugging  stage, designs developed on the computer using the Vivado design suite can be downloaded  onto the development board using a Joint Test Action Group (JTAG) or ethernet  connection, then tested in hardware, using peripherals and external interfaces if required.  Debugging may include, for instance: using a debugger to interact with the processor and  monitor its behaviour; user interaction with the design running on the chip via a USB UART connection and the Terminal interface on the PC; and by executing hardware-in the-loop simulations with the aid of an ethernet connection.  

The topic of development boards will be returned to in Section 3.6, when a review of  currently available boards will be presented (note that the selection may expand over time).

Taking all of the factors discussed in this chapter so far into consideration, Figure 3.1  provides a graphical summary of a typical setup for getting started with Zynq.

Zynq development setup.png


  • XC2064-100PC44C

    Manufacturer:Xilinx

  • LOGIC CELL ARRAY Field Programmable Gate Array
  • Product Categories:

    Lifecycle:Obsolete -

    RoHS: No RoHS

  • XC3S250E-5TQG144I

    Manufacturer:Xilinx

  • Xilinx TQFP144
  • Product Categories:

    Lifecycle:Any -

    RoHS: -

  • XC2064L-10VQ64C

    Manufacturer:Xilinx

  • LOGIC CELL ARRAY Field Programmable Gate Array
  • Product Categories:

    Lifecycle:Obsolete -

    RoHS: No RoHS

  • XC4020XL-3PQ208I

    Manufacturer:Xilinx

  • FPGA XC4000X Family 20K Gates 1862 Cells 0.35um Technology 3.3V 208-Pin PQFP
  • Product Categories: FPGAs (Field Programmable Gate Array)

    Lifecycle:Obsolete -

    RoHS: No RoHS

  • XC2100A-20S

    Manufacturer:Xilinx

  • RF Couplers Uni-directional Coupling 20.1dB 0.2GHz to 2.3GHz 4-Pin CSMD T/R
  • Product Categories: High-frequency devices

    Lifecycle:Any -

    RoHS: -

Need Help?

Support

If you have any questions about the product and related issues, Please contact us.