This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.
Home > FPGA Familis > Platform Manager 2 Family > LPTM21-1AFTG237I
LPTM21-1AFTG237I

Images are for reference only.

LPTM21-1AFTG237I

Get Latest Price >

$15.290 - $21.589 /Piece | 1 Piece/Pieces (Min. Order)

Lattice

237-LBGA

-

-

Factory Excess Stock / Franchised Distributor

PMIC - Power Management - Specialized

Digital Power Management IC 4.75V to 13.2V 237Pin FTBGA

Do you want to buy more and get a better price for LPTM21-1AFTG237I? Please fill in the short form below:
quantity
email
contact
company
content

LPTM21-1AFTG237I FPGAs Overview

The Lattice Platform Manager 2 device is a fast-reacting, programmable logic based hardware management controller. Platform Manager 2 is an integrated solution combining analog sense and control elements with scalable programmable logic resources. This unique approach allows Platform Manager 2 to integrate Power Management (Power Sequencing, Voltage Monitoring, Trimming and Margining), Thermal Management (Temperature Monitoring, Fan Control, Power Control), and Control Plane functions (System Configuration, I/O Expansion, etc.) as a single device.

Architecturally, the Platform Manager 2 device can be divided into two sections – Analog Sense and Control and FPGA. The Analog Sense and Control (ASC) section provides three types of analog sense channels: voltage (nine standard channels and one high voltage channel), current (one standard voltage and one high voltage) and temperature (two external and one internal).

Each of the analog sense channels is monitored through two independently programmable comparators to support both high/low and in-bounds/out-of-bounds (window-compare) monitor functions. In addition, each of the current sense channels provides a fast fault detect (one µs response time) for detecting short circuit events. The temperature sense channels can be configured to work with different external transistor or diode configurations.

The Analog Sense and Control section also provides ten general purpose 5 V tolerant open-drain digital input/output pins that can be used for controlling DC-DC converters, low-drop-out regulators (LDOs) and opto-couplers, as well as for general purpose logic interface functions. In addition, four high-voltage charge pumped outputs (HVOUT1-HVOUT4) may be configured as high-voltage MOSFET drivers to control high-side MOSFET switches. These HVOUT outputs can also be programmed as static output signals or as switched outputs (to support external charge pump implementation) operating at a dedicated duty cycle and frequency

The ASC section incorporates four TRIM outputs for controlling the output voltages of DC-DC converters. Each power supply output voltage can be maintained typically within 0.5% tolerance across various load conditions using the Digital Closed Loop Control mode of the trimming block.

The internal 10-bit A/D converter can be used to measure the voltage and current through the I2 C bus. The ADC is also used in the digital closed loop control mode of the trimming block.

The ASC section also provides the capability of logging up to 16 status records into its nonvolatile EEPROM memory. Each record includes voltage, current and temperature monitor signals along with digital input and output levels.

The ASC section includes an output control block (OCB) which allows certain inputs and control signals a direct connection to the digital outputs or HVOUTs, bypassing the ASC-I/F for a faster response. The OCB is used to connect the fast current fault detect signal to an FPGA input directly. It also supports functions such as Hot Swap with a programmable hysteretic controller.

The FPGA section contains non-volatile low cost programmable logic of 1280 Look-Up Tables (LUTs). In addition to the LUT-based logic, the FPGA section features Embedded Block RAM (EBR), Distributed RAM, User Flash Memory (UFM), flexible I/Os, and hardened versions of commonly used functions such as SPI controller, I2 C controller and Timer/counter. The FPGA I/Os offer enhanced features such as drive strength control, slew rate control, buskeeper latches, internal pull-up or pull-down resistors, and open-drain outputs. These features are controllable on a “per-pin” basis.

The power management, thermal management and control plane logic functions are implemented in the FPGA section of Platform Manager 2. The FPGA receives the analog comparator values and inputs from the ASC section and sends output commands to the ASC section through the dedicated ASC-interface (ASC-I/F) high-speed, reliable serial channel. The FPGA hardware management functions are implemented using the Platform Designer tool inside Lattice Diamond software. The Platform Designer tool includes an easy to use sequence and monitor logic builder tool and a set of pre-engineered components for functions like time-stamped fault logging, voltage by identification (VID), and fan control.

The Platform Manager 2 is designed to enable seamless scaling of the number of voltage, current and temperature sense channels in the system by adding external Hardware Management Expanders. Hardware Management Expanders can be realized with either the Analog Sense and Control (ASC) L-ASC10 device or the LPTM21L (100- Ball caBGA package) device. The algorithm implemented within the FPGA section can access and control these external ASCs through the dedicated ASC-I/F. Larger systems with up to eight expanders can be created by using a MachXO2, MachXO3, or ECP5 FPGA in place of the Platform Manager 2 device. The expander devices are connected in a scalable, star topology to Platform Manager 2, MachXO2, MachXO3, or ECP5.

The Platform Manager 2 has an I2 C interface which is used by the FPGA section for ASC interface configuration. The I2 C interface also provides the mechanism for parameter measurement or I/O control or status. For example, voltage trim targets can be set over the I2 C bus and measured voltage, current, or temperature values can be read over the I2 C bus.

The Platform Manager 2 device can be programmed in-system through JTAG or I2 C interfaces. The configuration is stored in on-chip non-volatile memory. Upon power-on, the FPGA section configuration is transferred to the on-chip SRAM and the device operates from SRAM. It is possible to update the non-volatile memory content in the background without interrupting the system operation.


Features

Ten Rail Voltage Monitoring and Measurement

• UV/OV Fault Detection Accuracy – 0.2% Typ.

• Fault Detection Speed < 100 µs

• High Voltage, Single Ended and Differential Sensing


Two Channel Wide-Range Current Monitoring and Measurement

• High-side current measurement up to 12 V

• Programmable OC/UC Fault Detect

• Detects Current faults in <1 µs


Three Temperature Monitoring and Measurement Channels

• Programmable OT/UT Faults Threshold

• Two channels of Temperature Monitoring using external diodes

• On-Chip Temperature Monitor


4 High-Side MOSFET Drivers

• Programmable Charge Pump


Four Precision Trim and Margin Channels

• Closed Loop Operation

• Voltage Scaling and VID Support


Ten General Purpose Input/Output

• 5 V tolerant I/O


Non-Volatile Fault Logging


Programmed through JTAG or I2 C

• Background Update with Dual-Boot Backup


FPGA Resources

• 1280 LUT, 98 I/O Version (LPTM21)

• 1280 LUT, 33 I/O Version (LPTM21L)


RAM and Flash Memories

Scalable Hardware Management Architecture

• Glueless interface to Hardware Management Expander (L-ASC10)

• Migrate between LPTM21 and larger density MachXO2, MachXO3, and ECP5 devices to extend logic and I/O resources


System Level Support

• Operating voltage from 2.8 V to 3.46 V

• Industrial and commercial temperature ranges

• 237-ball ftBGA (LPTM21)

• 100-ball caBGA (LPTM21L)

• RoHS compliant and halogen-free

FAQ

  • Q: Does the price of LPTM21-1AFTG237I devices fluctuate frequently?
  • The FPGAkey search engine monitors the LPTM21-1AFTG237I inventory quantity and price of global electronic component suppliers in real time, and regularly records historical price data. You can view the historical price trends of electronic components to provide a basis for your purchasing decisions.
  • Q: Do I have to sign up on the website to make an inquiry for LPTM21-1AFTG237I?
  • No, only submit the quantity, email address and other contact information required for the inquiry of LPTM21-1AFTG237I, but you need to sign up for the post comments and resource downloads.
  • Q: How can I obtain software development tools related to the Lattice FPGA platform?
  • Lattice's development environment uses Diamone. These recommendations are all reference opinions. The specific choice depends on personal habits and functional requirements to specifically select a more suitable match. You can search and download through the FPGA resource channel.
  • Q: Where can I purchase Lattice LPTM21 Development Boards, Evaluation Boards, or Platform Manager 2 Starter Kit? also provide technical information?
  • FPGAkey does not provide development board purchase services for the time being, but customers often consult about ZedBoard, Basys 3 board, TinyFPGA BX, Nexys4-DDR, Terasic DE10-Nano, Digilent Arty S7, etc. If you need relevant technical information, you can submit feedback information, our technicians will contact you soon.
  • Q: How to obtain LPTM21-1AFTG237I technical support documents?
  • Enter the "LPTM21-1AFTG237I" keyword in the search box of the website, or find these through the Download Channel or FPGA Forum .
  • Q: What should I do if I did not receive the technical support for LPTM211AFTG237I in time?
  • Depending on the time difference between your location and our location, it may take several hours for us to reply, please be patient, our FPGA technical engineer will help you with the LPTM21-1AFTG237I pinout information, replacement, datasheet in pdf, programming tools, starter kit, etc.

Application Field

  • AI

    Artificial Intelligence

  • 5G Technology

    5G Technology

  • Cloud Computing

    Cloud Computing

  • Consumer Electronics

    Consumer Electronics

  • Wireless

    Wireless Technology

  • Industrial Control

    Industrial Control

  • Internet of Things

    Internet of Things

  • Medical Equipment

    Medical Equipment

Technical Attributes

  • Applications

    Hardware Management Controller

  • Voltage - Supply

    4.75V ~ 13.2V

  • Operating Temperature

    -40℃ ~ 100℃

  • Mounting Type

    Surface Mount

  • Package / Case

    237-LBGA

  • Supplier Device Package

    237-FTBGA (17x17)

Technical Documents

  • LPTM21 Platform Manager 2 Family Data sheet Download>>

Circuit Diagram

LPTM21
LPTM21

LPTM21-1AFTG237I PDF Preview

LPTM21-1AFTG237I Tags

  • Lattice LPTM21
  • LPTM21 development board
  • Platform Manager 2 evaluation kit
  • Lattice Platform Manager 2 development board
  • Platform Manager 2 starter kit
  • Platform Manager 2 LPTM21
  • LPTM21 reference design
  • LPTM21 evaluation board
  • LPTM21-1AFTG237I Datasheet PDF

Other Authorized Distributors (Fpgakey will provide Competitive price from all franchised resource.)

  • DISTRIBUTOR
  • PART NUMBER
  • MANUFACTURER
  • DESCRIPTION
  • STOCK
  • PRICE
  • BUY
  • digikey
  • LPTM21-1AFTG237I
  • Lattice Semiconductor Corporation
  • IC PLATFORM MANAGER 237FTBGA
  • 0
  • 1+ $21.5885
    25+ $18.7943
    100+ $18.0152

  • mouser
  • LPTM21-1AFTG237I
  • Lattice
  • 77
  • 1+ $18.3300
    25+ $15.9500
    100+ $15.2900

Need Help?

Support

If you have any questions about the product and related issues, Please contact us.