This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.
Home > FPGA Familis > MachXO3 Family > LCMXO3LF-4300C-6BG400I
LCMXO3LF-4300C-6BG400I

Images are for reference only.

LCMXO3LF-4300C-6BG400I

Get Latest Price >

$13.900 - $19.668 | 1 Pieces(Min. Order)

Manufacturer:
Lattice
Package/Case:
CABGA-400
RoHS:
Lifecycle:
Active
Stock Resource:
Factory Excess Stock / Franchised Distributor
Product Categories:
Embedded - FPGAs (Field Programmable Gate Array)
Description:
FPGA MACHXO3 Family 4300 Cells 65nm Technology 1.2V Automotive 400-Pin CABGA Tray
Do you want to buy more and get a better price for LCMXO3LF-4300C-6BG400I? Please fill in the short form below:
quantity
email
contact
company
content

LCMXO3LF-4300C-6BG400I FPGAs Overview

MachXO3 device family is an Ultra-Low Density family that supports the most advanced programmable bridging and IO expansion. It has the breakthrough IO density and the lowest cost per IO. The device IO features have the integrated support for latest industry standard IO.

The MachXO3L/LF family of low power, instant-on, non-volatile PLDs has five devices with densities ranging from 640 to 9400 Look-Up Tables (LUTs). In addition to LUT-based, low-cost programmable logic these devices feature Embedded Block RAM (EBR), Distributed RAM, Phase Locked Loops (PLLs), pre-engineered source synchronous I/O support, advanced configuration support including dual-boot capability and hardened versions of commonly used functions such as SPI controller, I2C controller and timer/counter. MachXO3LF devices also support User Flash Memory (UFM). These features allow these devices to be used in low cost, high volume consumer and system applications.

The MachXO3L/LF devices are designed on a 65nm non-volatile low power process. The device architecture has several features such as programmable low swing differential I/Os and the ability to turn off I/O banks, on-chip PLLs and oscillators dynamically. These features help manage static and dynamic power consumption resulting in low static power for all members of the family.

The MachXO3L/LF devices are available in two versions C and E with two speed grades: -5 and -6, with -6 being the fastest. C devices have an internal linear voltage regulator which supports external VCC supply voltages of 3.3 V or 2.5 V. E devices only accept 1.2 V as the external VCC supply voltage. With the exception of power supply voltage both C and E are functionally compatible with each other.

The MachXO3L/LF PLDs are available in a broad range of advanced halogen-free packages ranging from the space saving 2.5 x 2.5 mm WLCSP to the 19 x 19 mm caBGA. MachXO3L/LF devices support density migration within the same package. Table 1-1 shows the LUT densities, package and I/O options, along with other key parameters

The MachXO3L/LF devices offer enhanced I/O features such as drive strength control, slew rate control, PCI compatibility, bus-keeper latches, pull-up resistors, pull-down resistors, open drain outputs and hot socketing. Pull-up, pull-down and bus-keeper features are controllable on a “per-pin” basis. A userprogrammable internal oscillator is included in MachXO3L/LF devices. The clock output from this oscillator may be divided by the timer/counter for use as clock input in functions such as LED control, key-board scanner and similar state machines. The MachXO3L/LF devices also provide flexible, reliable and secure configuration from on-chip NVCM/Flash. These devices can also configure themselves from external SPI Flash or be configured by an external master through the JTAG test access port or through the I2C port. Additionally, MachXO3L/LF devices support dual-boot capability (using external Flash memory) and remote field upgrade (TransFR) capability.

Lattice provides a variety of design tools that allow complex designs to be efficiently implemented using the MachXO3L/LF family of devices. Popular logic synthesis tools provide synthesis library support for MachXO3L/LF. Lattice design tools use the synthesis tool output along with the user-specified preferences and constraints to place and route the design in the MachXO3L/LF device. These tools extract the timing from the routing and back-annotate it into the design for timing verification.

Lattice provides many pre-engineered IP (Intellectual Property) LatticeCORE modules, including a number of reference designs licensed free of charge, optimized for the MachXO3L/LF PLD family. By using these configurable soft core IP cores as standardized blocks, users are free to concentrate on the unique aspects of their design, increasing their productivity.

The Lattice Embedded - FPGAs (Field Programmable Gate Array) series LCMXO3LF-4300C-6BG400I is MachXO3LF Series 4320 LUTs 92KB 335 I/O 2.5/3.3V Industrial Fast PLD - BGA-400, View Substitutes & Alternatives along with datasheets, stock, pricing from Authorized Distributors at FPGAkey.com, and you can also search for other FPGAs products.

Features

1.1.1. Solutions

 Smallest footprint, lowest power, high data throughput bridging solutions for mobile applications

 Optimized footprint, logic density, IO count, IO performance devices for IO management and logic applications

 High IO/logic, lowest cost/IO, high IO devices for IO expansion applications

1.1.2. Flexible Architecture

 Logic Density ranging from 64 to 9.4K LUT4

 High IO to LUT ratio with up to 384 IO pins

1.1.3. Advanced Packaging

 0.4 mm pitch: 1K to 4K densities in very small footprint WLCSP (2.5 mm × 2.5 mm to 3.8 mm × 3.8 mm) with 28 to 63 IOs

 0.5 mm pitch: 640 to 9.4K LUT densities in 6 mm x 6 mm to 10 mm x 10 mm BGA packages with up to 281 IOs

 0.8 mm pitch: 1K to 9.4K densities with up to 384 IOs in BGA packages

1.1.4. Pre-Engineered Source Synchronous I/O

 DDR registers in I/O cells

 Dedicated gearing logic

 7:1 Gearing for Display I/Os

 Generic DDR, DDRx2, DDRx4

1.1.5. High Performance, Flexible I/O Buffer

 Programmable sysIO buffer supports wide range of interfaces:

 LVCMOS 3.3/2.5/1.8/1.5/1.2

 LVTTL

 LVDS, Bus-LVDS, MLVDS, LVPECL

 MIPI D-PHY Emulated

 Schmitt trigger inputs, up to 0.5 V hysteresis

 Ideal for IO bridging applications

 I/Os support hot socketing

 On-chip differential termination

 Programmable pull-up or pull-down mode

1.1.6. Flexible On-Chip Clocking

 Eight primary clocks

 Up to two edge clocks for high-speed I/O interfaces (top and bottom sides only)

 Up to two analog PLLs per device with fractional-n frequency synthesis

 Wide input frequency range (7 MHz to 400 MHz).

1.1.7. Non-volatile, Multi-time Programmable

 Instant-on

 Powers up in microseconds

 Optional dual boot with external SPI memory

 Single-chip, secure solution

 Programmable through JTAG, SPI or I2C

 MachXO3L includes multi-time programmable NVCM

 MachXO3LF reconfigurable Flash includes 100,000 write/erase cycle

 Supports background programming of non-volatile memory

1.1.8. TransFR Reconfiguration

 In-field logic update while IO holds the system state

1.1.9. Enhanced System Level Support

 On-chip hardened functions: SPI, I2C, timer/counter

 On-chip oscillator with 5.5% accuracy

 Unique TraceID for system tracking

 Single power supply with extended operating range

 IEEE Standard 1149.1 boundary scan

 IEEE 1532 compliant in-system programming

Applications

 Consumer Electronics 

 Compute and Storage 

 Wireless Communications 

 Industrial Control Systems 

 Automotive System

FAQ

  • Q: Does the price of LCMXO3LF-4300C-6BG400I devices fluctuate frequently?
  • The FPGAkey search engine monitors the LCMXO3LF-4300C-6BG400I inventory quantity and price of global electronic component suppliers in real time, and regularly records historical price data. You can view the historical price trends of electronic components to provide a basis for your purchasing decisions.
  • Q: Do I have to sign up on the website to make an inquiry for LCMXO3LF-4300C-6BG400I?
  • No, only submit the quantity, email address and other contact information required for the inquiry of LCMXO3LF-4300C-6BG400I, but you need to sign up for the post comments and resource downloads.
  • Q: How can I obtain software development tools related to the Lattice FPGA platform?
  • Lattice's development environment uses Diamone. These recommendations are all reference opinions. The specific choice depends on personal habits and functional requirements to specifically select a more suitable match. You can search and download through the FPGA resource channel.
  • Q: Where can I purchase Lattice LCMXO3LF-4300 Development Boards, Evaluation Boards, or MachXO3 Starter Kit? also provide technical information?
  • FPGAkey does not provide development board purchase services for the time being, but customers often consult about ZedBoard, Basys 3 board, TinyFPGA BX, Nexys4-DDR, Terasic DE10-Nano, Digilent Arty S7, etc. If you need relevant technical information, you can submit feedback information, our technicians will contact you soon.
  • Q: How to obtain LCMXO3LF-4300C-6BG400I technical support documents?
  • Enter the "LCMXO3LF-4300C-6BG400I" keyword in the search box of the website, or find these through the Download Channel or FPGA Forum .
  • Q: What should I do if I did not receive the technical support for LCMXO3LF4300C6BG400I in time?
  • Depending on the time difference between your location and our location, it may take several hours for us to reply, please be patient, our FPGA technical engineer will help you with the LCMXO3LF-4300C-6BG400I pinout information, replacement, datasheet in pdf, programming tools, starter kit, etc.

Application Field

  • AI

    Artificial Intelligence

  • 5G Technology

    5G Technology

  • Cloud Computing

    Cloud Computing

  • Consumer Electronics

    Consumer Electronics

  • Wireless

    Wireless Technology

  • Industrial Control

    Industrial Control

  • Internet of Things

    Internet of Things

  • Medical Equipment

    Medical Equipment

LCMXO3LF-4300C-6BG400I Specifications

Specification Value
Number of LABs/CLBs 540
Number of Logic Elements/Cells 4320
Total RAM Bits 94208
Number of I/O 335
Voltage - Supply 2.375V ~ 3.465V
Mounting Type Surface Mount
Operating Temperature -40℃ ~ 100℃ (TJ)
Package / Case 400-LFBGA
Supplier Device Package 400-CABGA (17x17)

Technical Documents

  • LCMXO3LF-4300 MachXO3 Family Data sheet Download>>

Circuit Diagram

LCMXO3LF-4300
LCMXO3LF-4300

LCMXO3LF-4300C-6BG400I PDF Preview

LCMXO3LF-4300C-6BG400I Tags

  • Lattice LCMXO3LF-4300
  • LCMXO3LF-4300 development board
  • MachXO3 evaluation kit
  • Lattice MachXO3 development board
  • MachXO3 starter kit
  • MachXO3 LCMXO3LF-4300
  • LCMXO3LF-4300 reference design
  • LCMXO3LF-4300 evaluation board
  • LCMXO3LF-4300C-6BG400I Datasheet PDF

Other Authorized Distributors (Fpgakey will provide Competitive price from all franchised resource.)

  • DISTRIBUTOR
  • PART NUMBER
  • MANUFACTURER
  • DESCRIPTION
  • STOCK
  • PRICE
  • BUY
  • digikey
  • LCMXO3LF-4300C-6BG400I
  • Lattice Semiconductor Corporation
  • IC FPGA 335 I/O 400CABGA
  • 0
  • 1+ $19.6677
    25+ $17.1407
    100+ $16.3761

  • mouser
  • LCMXO3LF-4300C-6BG400I
  • Lattice Semiconductor Corporation
  • 88
  • 1+ $16.6900
    25+ $14.5500
    100+ $13.9000

Need Help?

Support

If you have any questions about the product and related issues, Please contact us.