L-ASC10-1SG48IAMJ of Lattice L-ASC10 Family

L-ASC10-1SG48IAMJ FPGAs Overview

The L-ASC10-1SG48IAMJ (Analog Sense and Control - 10 rail) is a Hardware Management (Power, Thermal, and Control Plane Management) Expander designed to be used with Platform Manager 2, MachXO2, MachXO3, or ECP5 FPGAs to implement the Hardware Management Control function in a circuit board. The L-ASC10-1SG48IAMJ (referred to as ASC) enables seamless scaling of power supply voltage and current monitoring, temperature monitoring, sequence and margin control channels. The ASC includes dedicated interfaces supporting the exchange of monitor signal status and output control signals with these centralized hardware management controllers. Up to eight ASC devices can be used to implement a hardware management system.

The ASC provides three types of analog sense channels: voltage (nine standard channels and one high voltage channel), current (one standard voltage and one high voltage), and temperature (two external and one internal) .

Each of the analog sense channels is monitored through two independently programmable comparators to support both high/low and in-bounds/out-of-bounds (window-compare) monitor functions. The current sense channels feature a programmable gain amplifier and a fast fault detect (<1 µs response time) for detecting short circuit events. The temperature sense channels can be configured to work with different external transistor or diode configurations.

Nine general purpose 5 V tolerant open-drain digital input/ output pins are provided that can be used in a system for controlling DC-DC converters, low-drop-out regulators (LDOs) and optocouplers, as well as for supervisory and general purpose logic interface functions. Four high-voltage charge pumped outputs (HVOUT1-HVOUT4) may be configured as high-voltage MOSFET drivers to control high-side MOSFET switches. These HVOUT outputs can also be programmed as static output signals or as switched outputs (to support external charge pump implementation) operating at a dedicated duty cycle and frequency.

The ASC device incorporates four TRIM outputs for controlling the output voltages of DC-DC converters. Each power supply output voltage can be maintained typically within 0.5% tolerance across various load conditions using the Digital Closed Loop Control mode.

The internal 10-bit A/D converter can be used to monitor the voltage and current through the I2 C bus. The ADC is also used in the digital closed loop control mode of the trimming block.

The ASC also provides the capability of logging up to 16 status records into the on-chip nonvolatile EEPROM memory. Each record includes voltage, current and temperature monitor signals along with digital input and output levels.

The dedicated ASC Interface (ASC-I/F) is a reliable serial channel used to communicate with a Platform Manager 2, MachXO2, MachXO3, or ECP5 FPGA in a scalable star topology. The centralized control algorithm in the FPGA monitors signal status and controls output behavior via this ASC-I/F. The ASC I2 C interface is used by the FPGA or an external microcontroller for ASC background programming, interface configuration, and additional data transfer such as parameter measurement or I/O control or status. For example, voltage trim targets can be set over the I2 C bus and measured voltage, current, or temperature values can be read over the I2 C bus.

The ASC also includes an on-chip output control block (OCB) which allows certain alarms and control signals a direct connection to the GPIOs or HVOUTs, bypassing the ASC-I/F for a faster response. The OCB is used to connect the fast current fault detect signal to an FPGA input directly. It also supports functions like Hot Swap with a programmable hysteretic controller.

Features

 Ten Rail Voltage Monitoring and Measurement

• UV/OV Fault Detection Accuracy - 0.2% Typ.

• Fault Detection Speed <100 µs

• High Voltage, Single Ended and Differential Sensing

 Two Channel Wide-Range Current Monitoring and Measurement

• High-side current Measurement up to 12 V

• Programmable OC/UC Fault Detect

• Detects Current faults in < 1 µs

 Three Temperature Monitoring and Measurement Channels

• Programmable OT/UT Faults Threshold

• Two channels of Temperature Monitoring using external diodes

• One On-Chip Temperature Monitor

 Four High-Side MOSFET Drivers

• Programmable Charge Pump

 Four Precision Trim and Margin Channels

• Closed Loop Operation

• Voltage Scaling and VID Support

 Nine General Purpose Input / Output

• 5 V tolerant I/O

 Non-Volatile Fault Logging

 In-system Programmable Through I2 C

• Non-Volatile Configuration

• Background Programming Support

 System Level Support

• 3.3 V Operation, wide input supply range 2.8 V to 3.6 V

• Industrial temperature range

• 48-pin QFN

• RoHS compliant and halogen-free

Applications

• Telecommunication and Networking

• Industrial, Test & Measurement

• Medical Systems

• Servers and Storage Systems

• High Reliability Systems

FAQ

Q: Does the price of L-ASC10-1SG48IAMJ devices fluctuate frequently?
The FPGAkey search engine monitors the L-ASC10-1SG48IAMJ inventory quantity and price of global electronic component suppliers in real time, and regularly records historical price data. You can view the historical price trends of electronic components to provide a basis for your purchasing decisions.
Q: Do I have to sign up on the website to make an inquiry for L-ASC10-1SG48IAMJ?
No, only submit the quantity, email address and other contact information required for the inquiry of L-ASC10-1SG48IAMJ, but you need to sign up for the post comments and resource downloads.
Q: How can I obtain software development tools related to the Lattice FPGA platform?
Lattice's development environment uses Diamone. These recommendations are all reference opinions. The specific choice depends on personal habits and functional requirements to specifically select a more suitable match. You can search and download through the FPGA resource channel.
Q: Where can I purchase Lattice L-ASC10 Development Boards, Evaluation Boards, or L-ASC10 Starter Kit? also provide technical information?
FPGAkey does not provide development board purchase services for the time being, but customers often consult about ZedBoard, Basys 3 board, TinyFPGA BX, Nexys4-DDR, Terasic DE10-Nano, Digilent Arty S7, etc. If you need relevant technical information, you can submit feedback information, our technicians will contact you soon.
Q: How to obtain L-ASC10-1SG48IAMJ technical support documents?
Enter the "L-ASC10-1SG48IAMJ" keyword in the search box of the website, or find these through the Download Channel or FPGA Forum .
Q: What should I do if I did not receive the technical support for LASC101SG48IAMJ in time?
Depending on the time difference between your location and our location, it may take several hours for us to reply, please be patient, our FPGA technical engineer will help you with the L-ASC10-1SG48IAMJ pinout information, replacement, datasheet in pdf, programming tools, starter kit, etc.