EPCS1SI8 FPGAs Overview
To configure a system using an SRAM-based device, each time you power on the
device, you must load the configuration data. The EPCS device is a flash memory
device that can store configuration data that you use for FPGA configuration
purpose after power on. You can use the EPCS device on all FPGA that support AS
x1 configuration scheme. For an 8-pin SOIC package, you can migrate vertically
from the EPCS1SI8 device to the EPCS4 or EPCS16 device. For a 16-pin SOIC package,
you can migrate vertically from the EPCS64 device to the EPCS128 device. With
the new data decompression feature supported, you can determine using which EPCS
device to store the configuration data for configuring your FPGA. Example 1
shows how you can calculate the compression ratio to determine which EPCS device
is suitable for the FPGA.
The INTEL Memory - Configuration Proms for FPGA's EPROM series EPCS1SI8 is FPGA - Configuration Memory IC - Ser. Config Mem Flash 1Mb 40 MHz, View Substitutes & Alternatives along with datasheets, stock, pricing from Authorized Distributors at FPGAkey.com,
and you can also search for other FPGAs products.
EPCS devices offer the following features:
■ Supports active serial (AS) x1 configuration scheme
■ Easy-to-use four-pin interface
■ Low cost, low pin count, and non-volatile memory
■ Low current during configuration and near-zero standby mode current
■ 2.7-V to 3.6-V operation
■ EPCS1, EPCS4, and EPCS16 devices available in 8-pin small-outline integrated circuit (SOIC) package
■ EPCS64 and EPCS128 devices available in 16-pin SOIC package
Q: Does the price of EPCS1SI8 devices fluctuate frequently?
The FPGAkey search engine monitors the EPCS1SI8 inventory quantity and price of global electronic component suppliers in real time,
and regularly records historical price data. You can view the historical price trends of electronic components to provide a basis for your
Q: Do I have to sign up on the website to make an inquiry for EPCS1SI8?
No, only submit the quantity, email address and other contact information required for the inquiry of EPCS1SI8, but you need to
sign up for the post comments and resource downloads.
Q: How can I obtain software development tools related to the INTEL FPGA platform?
Quartus Prime Modelsim is the corresponding programming software for FPGA produced by Altera/Intel.
The specific choice depends on personal habits and functional requirements to specifically select a more suitable match.
You can search and download through the FPGA resource channel.
Q: Where can I purchase INTEL EPCS1 Development Boards, Evaluation Boards,
or Serial Configuration (EPCS) Starter Kit? also provide technical information?
FPGAkey does not provide development board purchase services for the time being, but customers often consult about ZedBoard, Basys 3 board,
TinyFPGA BX, Nexys4-DDR, Terasic DE10-Nano, Digilent Arty S7, etc. If you need relevant technical information,
you can submit feedback information, our technicians will contact you soon.
Q: How to obtain EPCS1SI8 technical support documents?
Enter the "EPCS1SI8" keyword in the search box of the website, or find these through the Download Channel or FPGA Forum .
Q: What should I do if I did not receive the technical support for EPCS1SI8 in time?
Depending on the time difference between your location and our location, it may take several hours for us to reply, please be patient, our FPGA technical engineer will help you with the EPCS1SI8 pinout information, replacement, datasheet in pdf, programming tools, starter kit, etc.
Internet of Things