Keyestudio Uno R3 Development Board Datasheet

Keyestudio UNO R3 development board is a microcontroller board based on the ATmega328P (datasheet, fully compatible with ARDUINO UNO REV3. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a power jack, 2 ICSP headers, and a reset button.

It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get
started.

Note that the two ICSP headers are separately used to program the firmware to ATMEGA16U2-MU and ATMEGA328P-PU, but we have programmed the two chips, so generally, no need to use them. The Uno R3 differs from all preceding boards in that it does not use the FTDIkeyestudio USB-to-serial driver chip. Instead, it features the Atmega16U2 programmed as a USB-to-serial converter.

The UNO is the best board to get started with electronics and coding. If this is your first experience tinkering with the platform, the UNO is the most robust board you can start playing with.