EP610TPC-10 of Altera Classic EPLD Family

EP610TPC-10 FPGAs Overview

The Altera ClassicTM EP610TPC-10 device offers a solution to high-speed, lowpower logic integration. Fabricated on advanced CMOS technology, EP610TPC-10 devices also have a Turbo-only version, which is described in this data sheet.

Classic devices support 100% TTL emulation and can easily integrate multiple PAL- and GAL-type devices with densities ranging from 300 to 900 usable gates. The Classic family provides pin-to-pin logic delays as low as 10 ns and counter frequencies as high as 100 MHz. Classic devices are available in a wide range of packages, including ceramic dual in-line package (CerDIP), plastic dual in-line package (PDIP), plastic J-lead chip carrier (PLCC), ceramic J-lead chip carrier (JLCC), pin-grid array (PGA), and small-outline integrated circuit (SOIC) packages.

EP610TPC-10 devices have 16 macrocells, 4 dedicated input pins, 16 I/O pins, and 2 global clock pins. Each macrocell can access signals from the global bus, which consists of the true and complement forms of
the dedicated inputs and the true and complement forms of either the output of the macrocell or the I/O input. The CLK1 signal is a dedicated global clock input for the registers in macrocells 9 through 16. The CLK2 signal is a dedicated global clock input for registers in macrocells 1 through 8.

EPROM-based Classic devices can reduce active power consumption without sacrificing performance. This reduced power consumption makes the Classic family well suited for a wide range of low-power applications.

Classic devices are 100% generically tested devices in windowed packages and can be erased with ultra-violet (UV) light, allowing design changes to be implemented quickly. Classic devices use sum-of-products logic and a programmable register. The sum-of-products logic provides a programmable-AND/fixed-OR structure that can implement logic with up to eight product terms. The programmable register can be individually programmed for D, T, SR, or JK flipflop operation or can be bypassed for combinatorial operation. In addition, macrocell registers can be individually clocked either by a global clock or by any input or feedback path to the AND array. Altera’s proprietary programmable I/O architecture allows the designer to program output and feedback paths for combinatorial or registered operation in both active-high and active-low modes. These features make it possible to implement a variety of logic functions simultaneously.

Classic devices are supported by Altera’s MAX+PLUS II development system, a single, integrated package that offers schematic, text—including VHDL, Verilog HDL, and the Altera Hardware Description Language (AHDL)—and waveform design entry, compilation and logic synthesis, simulation and timing analysis, and device programming. The MAX+PLUS II software provides EDIF 2 0 0 and 3 0 0, LPM, VHDL, Verilog HDL, and other interfaces for additional design entry and simulation support from other industry-standard PC- and workstationbased EDA tools. The MAX+PLUS II software runs on Windows-based PCs, as well as Sun SPARCstation, HP 9000 Series 700/800, and IBM RISC System/6000 workstations. These devices also contain on-board logic test circuitry to allow verification of function and AC specifications during standard production flow.

Features

■ High-performance, 16-macrocell Classic EPLD
– Combinatorial speeds withtPD as fast as 10 ns

– Counter frequencies of up to 100 MHz
– Pipelined data rates of up to 125 MHz
■ Programmable I/O architecture with up to 20 inputs or 16 outputs and 2 clock pins
■ EP610 and EP610I devices are pin-, function-, and programming file-compatible
■ Programmable clock option for independent clocking of all registers
■ Macrocells individually programmable as D, T, JK, or SR flipflops, or for combinatorial operation
■ Available in the following packages (see Figure 7):
– 24-pin small-outline integrated circuit (plastic SOIC only)
– 24-pin ceramic and plastic dual in-line package (CerDIP and PDIP)
– 28-pin plastic J-lead chip carrier (PLCC)

FAQ

Q: Does the price of EP610TPC-10 devices fluctuate frequently?
The FPGAkey search engine monitors the EP610TPC-10 inventory quantity and price of global electronic component suppliers in real time, and regularly records historical price data. You can view the historical price trends of electronic components to provide a basis for your purchasing decisions.
Q: Do I have to sign up on the website to make an inquiry for EP610TPC-10?
No, only submit the quantity, email address and other contact information required for the inquiry of EP610TPC-10, but you need to sign up for the post comments and resource downloads.
Q: How can I obtain software development tools related to the Altera FPGA platform?
Quartus Prime Modelsim is the corresponding programming software for FPGA produced by Altera/Intel. The specific choice depends on personal habits and functional requirements to specifically select a more suitable match. You can search and download through the FPGA resource channel.
Q: Where can I purchase Altera EP610 Development Boards, Evaluation Boards, or Classic EPLD Starter Kit? also provide technical information?
FPGAkey does not provide development board purchase services for the time being, but customers often consult about ZedBoard, Basys 3 board, TinyFPGA BX, Nexys4-DDR, Terasic DE10-Nano, Digilent Arty S7, etc. If you need relevant technical information, you can submit feedback information, our technicians will contact you soon.
Q: How to obtain EP610TPC-10 technical support documents?
Enter the "EP610TPC-10" keyword in the search box of the website, or find these through the Download Channel or FPGA Forum .
Q: What should I do if I did not receive the technical support for EP610TPC10 in time?
Depending on the time difference between your location and our location, it may take several hours for us to reply, please be patient, our FPGA technical engineer will help you with the EP610TPC-10 pinout information, replacement, datasheet in pdf, programming tools, starter kit, etc.