EP2C70F896C7K of Altera Cyclone II FPGA

EP2C70F896C7K FPGAs Overview

Following the immensely successful first-generation Cyclone device family, Altera Cyclone II FPGAs extend the low-cost FPGA density range to 68,416 logic elements (LEs) and provide up to 622 usable I/O pins and up to 1.1 Mbits of embedded memory. Cyclone II EP2C70F896C7K FPGAs are manufactured on 300-mm wafers using TSMC's 90-nm low-k dielectric process to ensure rapid availability and low cost. By minimizing silicon area, Cyclone II devices can support complex digital systems on a single chip at a cost that rivals that of ASICs. Unlike other FPGA vendors who compromise power consumption and performance for low-cost, Altera’s latest generation of low-cost FPGAs—Cyclone II FPGAs, offer 60% higher performance and half the power consumption of competing 90-nm FPGAs. The low cost and optimized feature set of Cyclone II EP2C70F896C7K FPGAs make them ideal solutions for a wide array of automotive, consumer, communications, video processing, test and measurement, and other end-market solutions.

Features

The Cyclone II device family offers the following features:
■ High-density architecture with 4,608 to 68,416 LEs
● M4K embedded memory blocks
● Up to 1.1 Mbits of RAM available without reducing available logic
● 4,096 memory bits per block (4,608 bits per block including 512 parity bits)
● Variable port configurations of ×1, ×2, ×4, ×8, ×9, ×16, ×18, ×32, and ×36
● True dual-port (one read and one write, two reads, or two writes) operation for ×1, ×2, ×4, ×8, ×9, ×16, and ×18 modes
● Byte enables for data input masking during writes
● Up to 260-MHz operation
■ Embedded multipliers
● Up to 150 18- × 18-bit multipliers are each configurable as two independent 9- × 9-bit multipliers with up to 250-MHz performance
● Optional input and output registers

FAQ

Q: Does the price of EP2C70F896C7K devices fluctuate frequently?
The FPGAkey search engine monitors the EP2C70F896C7K inventory quantity and price of global electronic component suppliers in real time, and regularly records historical price data. You can view the historical price trends of electronic components to provide a basis for your purchasing decisions.
Q: Do I have to sign up on the website to make an inquiry for EP2C70F896C7K?
No, only submit the quantity, email address and other contact information required for the inquiry of EP2C70F896C7K, but you need to sign up for the post comments and resource downloads.
Q: How can I obtain software development tools related to the Altera FPGA platform?
Quartus Prime Modelsim is the corresponding programming software for FPGA produced by Altera/Intel. The specific choice depends on personal habits and functional requirements to specifically select a more suitable match. You can search and download through the FPGA resource channel.
Q: Where can I purchase Altera EP2C70 Development Boards, Evaluation Boards, or Cyclone II FPGA Starter Kit? also provide technical information?
FPGAkey does not provide development board purchase services for the time being, but customers often consult about ZedBoard, Basys 3 board, TinyFPGA BX, Nexys4-DDR, Terasic DE10-Nano, Digilent Arty S7, etc. If you need relevant technical information, you can submit feedback information, our technicians will contact you soon.
Q: How to obtain EP2C70F896C7K technical support documents?
Enter the "EP2C70F896C7K" keyword in the search box of the website, or find these through the Download Channel or FPGA Forum .
Q: What should I do if I did not receive the technical support for EP2C70F896C7K in time?
Depending on the time difference between your location and our location, it may take several hours for us to reply, please be patient, our FPGA technical engineer will help you with the EP2C70F896C7K pinout information, replacement, datasheet in pdf, programming tools, starter kit, etc.